DHK038 iyada oo loo marayo giraanta iskuxirka
DHK038 iyada oo loo marayo sharaxaadda wax soo saarka sawirka
DHK038 ee taxanaha godyada godyada godyada, 38.1mm, dhexroor dibadda ah 99mm, oo ku habboon wareejinta nidaamyada farsamada ee ah in ka yar 38mm, oo ah lings '(0-20a / giraanta) ama 1-12 giraanta. 0 ~ 5a / giraan).
Codsiga caadiga ah
Qalabka kala duwan, qalabka amniga, qalabka madadaalada, robotsyo kala duwan, maaliyayaal, maareyaal kala duwan, mashiinooyinka jiifka dabaysha ee dabeylka, makiinadaha kormeerka ee dhalada,
Sharaxaadda Magaca Waxsoosaarka
- (1) Nooca wax soo saarka: Giraanta is-galka ah ee DH-kombuyutarka
- (2) Qaabka rakibaadda: god kor u galaya
- (3) Dhex-dhexaadka sheybaarka dambe ee boosta ah: 38- 38 mm
- (4) Wadarta guud ee wareegga: 12-12 wareeg
- (5) Waxaa lagu qiimeeyay hadda ama lama calaamadayn doono haddii ay ku dhex mariso mid kale oo lagu qiimeeyo wareegyada.
- (6) Aqoonso lambarka: --xxx; Si loo kala sooco faahfaahinta kala duwan ee qaabka badeecada, nambarka aqoonsiga ayaa lagu dari doonaa ka dib magaca. Tusaale ahaan: DHK038-12 wuxuu leeyahay laba nooc oo alaab ah oo leh isla magac, dhererka fiilada, isku xidhka, habka rakibaadda, iwm. Haddii ay jiraan nooc ka badan qaabkan mustaqbalka, iyo sidaa darteed -003, -004, iwm.
DHK038 iyada oo loo marayo Wareega Labaad ee Jaranjarada 2D ee sawirka caadiga ah
Haddii aad u baahan tahay nashqade dheeraad ah 2D ama 3D sawir, fadlan u dir macluumaadka emaylka emaylka ah[emayl la ilaaliyo], injineerkeena ayaa kuu samayn doona sida ugu dhakhsaha badan, mahadsanid
DHK038 iyada oo loo marayo cabirrada farsamada gacanta ee booliiska
| Miiska Fasalka Waxsoosaarka | |||
| Fasalka wax soo saarka | Xawaaraha shaqada | Nolosha shaqada | |
| Guud | 0 ~ 200 RPM | 20 milyan oo kacdoon | |
| Warshad ah | 300 ~ 1000RPM | 60 Milyan oo Kale ah | |
| Cayayaanka farsamada | |||
| Farsamaynta Electrical | Farsamo farsamo | ||
| Cabir | Qiimayn | Cabir | Qiimayn |
| Tirada siddooyinka | Caado | Heerkulka shaqada | -40 ℃ ~ + 65 ℃ |
| Lagu qiimeeyay hadda | 2A, 5A, 10a, 15A, 20A | Qoyaanka Shaqada | <70% |
| Korantada lagu qiimeeyay | 0 ~ 240vac / VDC | Heerka Ilaalinta | Ip54 |
| Iska caabinta iska caabinta | ≥1000μωω @ 500vdc | Sheyga shelt | Aluminium alloy |
| Xoogga Daynta | 1500vac @ 50hz, 60s, 2ma | Qalabka Xiriirka Korantada | Birta qaaliga ah |
| Qiimaha isbedelka is-caabbinta firfircoon | <10mω | XAQIIQADA HIGH | Teflon midab leh |
| Xawaaraha shaqada | 0-600rpm | Dhererka lead | 500mm + 20mm |
DHK038 iyada oo loo marayo miiska Tooska ah ee Cinwaanka
| Miiska faahfaahinta siinta | ||||
| Lagu qiimeeyay hadda | Cabbirka Wire (AWG) | Cabbirka futada (mm²) | Midabka silig | Dhexroor dhexroor |
| ≤A | AWG26 # | 0.15 | Casaan, jaalle, madow, buluug, cagaar, caddaan, bunni, cawlan, oranji, guduud, nal, casaan, hufan, hufan | Φ1 |
| 3A | AWG24 # | 0.2 | Casaan, jaalle ah, madow, buluug, cagaar, bunni, cawlan, cawlan, cawlan, guduud, guduud, guduud, guduud caddaan ah, casaan cadaan ah | Φ1.3 |
| 5A | AWG22 # | 0.35 | Casaan, jaalle ah, madow, buluug, cagaar, bunni, cawlan, cawlan, cawlan, guduud, guduud, guduud, guduud caddaan ah, casaan cadaan ah | Φ1.3 |
| 6A | AWG20 # | 0.5 | Casaan, jaalle ah | Φ1.4 |
| 8A | AWG18 # | 0.75 | Casaan, jaalle ah, madow, bunni, cagaar, caddaan, buluug, cawlan, cawlan, oranji, guduud | Φ1.6 |
| 10a | Awg16 # | 1.5 | Casaan, jaalle, madow, bunni, cagaar, caddaan | Φ2.0 |
| 15a | Awg14 # | 2.00 | Casaan, jaalle, madow, bunni, cagaar, caddaan | Φ2.3 |
| 20A | Awg14 # | 2.5 | Casaan, jaalle, madow, bunni, cagaar, caddaan | Φ2.3 |
| 25a | AWG12 # | 3.00 | Casaan, jaalle, madow, buluug | Φ3.2 |
| 30A | AWG10 # | 6.00 | Guduudan | Φ4.2 |
| > 30a | U adeegso dhulbahand badan12 # ama wareeg badan10 # fiilooyin isbarbar socda | |||
Sharraxaadda dhererka saqafka haynta:
1.500 + 20mm (Shuruudaha Guud: Cabir dhererka silig ah ee dhamaadka dhamaadka wejiga godka siligga silig ee lugta hoose ee giraanta dhejiska ah).
2.Letyth sida ay u baahan tahay macaamiisha: l <1000mm, heerka l + 20mm
L> 1000mm, Standard L + 50mm
L> 5000mm, Standard L + 100mm
Taxanaha DHK038 Taariikhda ayaa kugula talinaysa badeecada iyadoo la adeegsanayo
| Shayga No. | Lambarka wicitaanka | Dhererka 2a | 5a dherer | 10a dherer | 15a dherer | 20a dherer |
| DHK038-6 | 6 | 33.4 | 34.6 | 36.4 | 39.4 | 42.4 |
| DHK038-12 | 12 | 45.4 | 47.8 | 51.4 | 57.4 | 63.4 |
| DHK038-18 | 18 | 57.4 | 61 | 66.4 | 75.4 | 84.4 |
| DHK038-24 | 24 | 69.4 | 74.2 | 81.4 | 93.4 | 105.4 |
| DHK038-30 | 30 | 81.4 | 87.4 | - | - | . |
| DHK038-36 | 36 | 93.4 | 100.6 | - | - | - |
| DHK038-42 | 42 | 105.4 | 113.8 | - | - | - |
| DHK038-48 | 48 | 117.4 | 127 | - | - | - |
Tilmaanta TILMAAMAHA: 2a oo leh AWG26 # Midable Teflon Teflon TEFLON, 5a oo leh AWG22 # TEFLON TEFLON TEFLON TEFLON TEFLON
10A waxay u isticmaashaa AWG18 # TEFLON TEFLON TEFLON PRONSIT (AMA AWG16 # FLEXED Midable PVC Line Pifeasted)
15A wuxuu adeegsadaa SWIG16 # TEFLON TEFLON TEFLON PRONT (AMA AWG14 # FLEXED MEST PVC LOCESSION PLASTUND)
20A waxay isticmaashaa AWG14 # TEFLON TEFLON TEFLON.
Dhererka isku-darka sheyga ee leh tiro aan sabab lahayn oo kanaalada (N2, N5, N10, N15, N1) (MM):
L = 15.4 + 2 * N2 + 2.2 * N5 + 2.5 * N10 + 3 * N15 + 3. N20
